Service Manual
Model No:
MABE-1789
Issue
Rev.
23
Actual Circuit Diagram
Computer
sequencer
Cabinet
Control
panel seat
L
Yellow
Blue
Motor
W
ater Inlet
Valve
Orange
Orange
Red/White
Red/White
Yellow Yellow
Brown
Fuse
White
Brown
Red
Red
Gray
Retractor
Chapter 8: Test program
C1 Test: Hold ‘Cycle’ and ‘Water Temp’ at the same time,then press ‘Power’.Digital tube
displays ‘C1’. All lights are lit.1s after the digital tube and all the lights flashing out 3
times, while the
buzzer rang 3 times, and then power off.
C2 Test: Then press ‘Water Temp’ in three seconds.Digital tube displays ‘22’ .
Then Perform washing process.
C3 Test: On the basis of above C2 test,press ‘Water Temp’ again, the digital tube display ‘5’, then
perform spin process for 5min,during this process, you can check the ‘E2’,’E3’ alarm.
Software break
:
The show board of all models have to be break by software,the methord is follows:
Frist press “Power”,then”Process” and “Cycle” at the same time.Digital tub display
“b1”,then hold “Process” to 22, hold “Start/Pause” finally.