External Equipment Connections
LED Backlit Flat TV Instruction Manual EN-10
En
External Equipment Connections
Power source
To use AC Power Supply
Use the AC polarized line cord provided for operation on
AC. Insert the AC cord plug into a standard polarized AC
outlet.
Note
Never connect the AC line cord plug to other than
▲
the specified voltage. Use the attached power cord
only.
If the polarized AC cord does not fit into a non-
▲
polarized AC outlet, do not attempt to file or cut
the blade. It is the user’s responsibility to have an
electrician replace the obsolete outlet.
If you cause a static discharge when touching the
▲
unit and the unit fails to function, simply unplug
the unit from the AC outlet and plug it back in. The
unit should return to normal operation.
Connecting to an
Antenna or Cable
Connection
Over-the-air TV reception quality will depend on your
antenna type, antenna location and antenna positioning.
Cable Television
Network
or
VHF/UHF Antenna
Note
T
▲
o improve the picture quality in a poor signal
area, please purchase a signal amplifier and install
properly.
If the antenna needs to be split for two TV’s, install
▲
a “2-Way Signal Splitter” .
When you move or swivel the TV with Antenna
▲
cable tightly connected, there is high risk antenna
jack on TV will be broken off.
