Haier L55s, Руководство пользователя

Страница: 25 / 28

The WEEE logo on the product or on its box indicates that this product
must not be disposed of or dumped with your other household waste. You
are liable to dispose of all your electronic or electrical waste equipment by
relocating over to the speci
fi ed collection point for recycling of such
hazardous waste. Isolated collection and proper recovery of your electronic
and electrical waste equipment at the time of disposal will allow us to help
conserving natural resources. Moreover, proper recycling of the electronic
and electrical waste equipment will ensure safety of human health and
environment.
Radio Frequency Exposure:
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE
TO RADIO WAVES.
Proof of compliance with international standards (ICNIRP) or with
European Directive 1999/5/EC (R&TTE) is required of all mobile phone
models before they can be put on the market. The protection of the health
and safety for the user and any other person is an essential requirement of
these standards or this directive.
Your mobile device is a radio transmitter and receiver. It is designed not to
exceed the limits for exposure to radio waves (radio frequency
electromagnetic
fi elds) recommended by international guidelines. The
guidelines were developed by an independent scienti fi c organization
(ICNIRP) and include a substantial safety margin designed to assure the
safety of all persons.
The radio wave exposure guidelines use a unit of measurement known as
the Speci
fi c Absorption Rate, or SAR. The SAR limit for mobile devices is 2
W/kg. Tests for SAR are conducted using standard operating positions with
the device transmitting at its highest certi
fi ed power level in all tested
frequency bands. The maximum SAR values tested on this device when
used in its normal position at the ear and when used close to the body (at a
minimum distance of 0.5cm) are:
Head 0.311W/kg
Body 1.022W/kg
During use, the actual SAR values for this device are usually well below the
values stated above. This is because, for purposes of system e
ffi ciency
and to minimize interference on the network, the operating power of your
mobile device is automatically decreased when full power is not needed for
the call. The lower the power output of the device, the lower its SAR value.
24