![background image](http://html.mh-extra.com/html/haier/l26a8a-a1/l26a8a-a1_operating-instructions-manual_136859004.webp)
6
WALL MOUNT SWITCHING SUPPORT ASSEMBLY INSTRUCTIONS
(1) In order not to scratch the
TV set, it is recommended
putting the TV set with face
down on the soft and clean
blanket.
(2)Disassemble the six screws
from base and remove the
base. (This item will be
cancelled if the product is
without base.)
(3)Mount the airproof board.
(4)Take out the switching
support from the accessory
bag, and use four M5
×
16
screws (included in the
Base
Switching support
Switching support
Airproof board
BUTTONS AND INTERFACE POSITION
5
Front control panel
Back interface
1. Antenna input
2. Earphone output
3. SCART2 input
4. SCART1 input
5. S-VIDEO input
6. YPbPr input
7. VGA audio input interface
8. VGA input
9. HDMI input
10.Power input socket
CH -
TV /AV
ME NU
Power button
Program down/up button
Volume down/up button
TV/AV switch button
Menu button
CH +
VO L-
VO L+
CH-
TV/AV
MENU
CH+
VOL-
VOL+
L26A8A
-
A1
/
L32A8A
-
A1
/
L37A8A
-
A1
L40A8A
-
A1
Power indicator
Remote sensor
Power indicator
Remote sensor
Power button
Program down/up button
Volume down/up button
TV/AV switch button
Menu button
CH-
TV/AV
MENU
CH+
VOL-
VOL+
L26A8A
-
A1
/
L32A8A
-
A1
/
L37A8A
-
A1
L40A8A
-
A1
accessory bag) to fix the switching support on the back of complete set.
(5)The remaining four M5
×
16 screws in the accessory bag are used to mount the wall
mount parts.(The wall mount parts are in the wall mount box.)
(6)After completing the above operations, the complete set can be mounted on the wall
mount bracket.(Wall mount bracket operations refer to the assembly instructions of it.)
Note: 1. The arrow indicates the position of screw.
2. This operation is only used before mounting the bracket.
3. Wall mount bracket is additional purchase.
4. L37A8A-A1 is without switching support, you can mount directly after
disassembling the base.
(1)As figure, removing the four M4
×
20 screws, the base
will be disassembled.
(2)As figure, mounting the four M4
×
20 screws, the base
will be assembled.
Note:
The arrow indicates the position of screw.
The position to strike the screw.
BASE DISASSEMBLY/ASSEMBLY METHOD
3
6
8
10
7
2
1
POWER
9
HDMI
L
-
AUDIO
-
R
5
4
SCART1
SCART2
-