background image

HOUSEHOLD GAS HOB

INSTALLATION AND USER  INSTRUCTIONS

Note: Do not use the hob until you have read the instruction manual.

Cod:

1. INTRODUCTION

 

2. TECHNICAL DATA

3. INSTALLATION INSTRUCTIONS

 

Product features

◆ 

Part name

◆ 

Installation method

 

Connection method

SAFETY INSTRUCTIONS

Make sure that this instruction booklet is read thoroughly and 

understood before attempting to install or operate this hob.

The instructions are provided in the interest of your safety. 

GAS SAFETY REGULATIONS AND USE OF YOUR HOB

1. Please carefully read the nameplate of the gas hob you purchased 

and make sure the type of gas specified on the nameplate matches 

the type of gas you are currently using.

2. It is recommended to check the connections of gas hob for air 

tightness at least once a year and replace the gas-dedicated 

connecting pipe.

3. In the use process of gas hob, note ventilation, open the window or 

turn on the ventilation fan on a regular basis to ensure fresh air 

convection and ventilation.

4. In case of a leakage, avoid all the acts and sources of fire that 

cause gas explosion, immediately close the gas valve and open the 

windows and doors for ventilation.

5. It is a legal requirement that all gas appliances are installed by 

qualified personnel only in accordance with current legislation.  It is 

your responsibility to ensure compliance with the law.

6. Repairs or servicing of this product must only be carried out by an 

authorised service agent using approved parts.

7. No attempt must be made to modify this appliance under any 

circumstances.

8. Cooking appliances can become very hot in use – please keep 

children and pets away from them.

9.  Do not allow children to operate or play with any part of the 

appliance.

10.Do not use unstable pans and ensure that the handle is positioned 

away from the edge of the worktop.

11. In the interest of hygiene and safety, please ensure the hob is 

kept clean.

12. This appliance is designed for domestic cooking only.   

Commercial use will invalidate the warranty.

13. Do not cover the hob or place combustible materials on or near 

the surface even when the hob is not in use.

14. Do not fill deep fat frying containers more than one third full of oil 

and NEVER  leave unattended.

15.   Before cleaning the hob, switch off at the mains.

16.   When cooking is finished, switch off all controls and allow to 

cool.

17.   These appliances are not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities, or lack 

of experience and knowledge, unless they have been given 

supervision or instruction concerning use of the appliance by a 

person responsible for their safety.

18.  If the supply cable  is damaged, it must be replaced by the 

authorised service agent or qualified person only.

19.   Do not immerse the appliance or the power cable into water or 

any other liquid.

JZT/Y-QB230

Even if you have used a gas hob before, it is important that  you read these instructions thoroughly 

before using the appliance, paying particular attention to the installation and safety instructions. If you 

have any problems installing, operating or cooking with your hob, please check through these 

instructions to ensure all of them have been adhered to.

WARNING!   For your own safety, make sure that these instructions on installation, use and 

maintenance are followed.

Please keep these instructions in a safe place for future reference.

Should the appliance be sold or transferred, please pass on these instructions to the new owner

.

Note: the picture is the appearance sketch of the product and the specific appearance and color are

subject to the purchased product.

 cooktop

 hob shell

knob

pot rack

thermocouple

Outer-ring fire cover
inner-ring fire cover

 Ignition porcelain needle

Type

Applicable

 gas type

2800

LPG

Rated pressure 

      (Pa)

Rated heat load (kW)

Left burner Right burner

Net Weight /
Gross Weight(kg) 

Size(mm)

Length × Width 
× Height

3.8

3.8

730×410×135

10.5/12.0

JZT/Y-QB230

Type

620

730

410

345

a(mm) b(mm) c(mm) d(mm)

JZT/Y-QB230

 Overall dimensions    Cooktop hole size

16

a

b

c

150

<R50

≥50

d

100

≥550

单位:

mm

≥1000

200

200

200

Unit: mm

Rubber hose
Pipe clamp
Red line
Intake joint

combustibles

combustibles

Unit: mm

Do not install the gas hob above poorly ventilated ovens, refrigerators, freezers, 

dishwashers, sterilizer, or other types of kitchen appliances.

After the installation, make sure the gas connecting pipe is not twisted, squeezed, bent 

and is not in touch with any movable part of the cabinet, such as drawers, rails, etc .; 

avoid high temperature area.

At least 100mm vacant space shall be reserved below the bottom of hob after the gas hob

 is embedded into cabinet and all items are prohibited to be stored in the vacant space. To

 ensure good ventilation and cooling of the gas hob, open 2 openings of about 50mm in 

diameter on the back or side of the cabinet to the atmosphere to avoid the explosion 

caused by the accumulation of unburned gas mixture. If the cabinet is not perforated, take 

ventilation measures.

Note

Note

● 

Accidental flameout protection design

In case of an accidental flameout due to air, overflow, accidental flameout protection function will 

start to automatically cut off internal gas access of gas hob and avoid mass gas leakage to ensure 

user safety.

● 

Glass panel hob applies tempered glass with explosion-proof mesh, which is safe, durable and 

easy to clean.

● 

When the gas hob is embedded in the cooktop, please follow the steps 1-5 to install.

   When the gas hob is put on the cooktop, please follow the steps 4-5 to install. 

1. Please choose the cabinet with table thickness greater than 16mm, width not less than 550mm;

Note: The cabinet countertops should be made of fire, high temperature-resistant, thermocycling- 

resistant material. The coating layer and plywood on the cabinet must be fire-resistant and glued 

together to avoid deformation or surface detachment.

2. According to the hole-digging size and requirements in the instruction, dig holes in the 

corresponding position of the table with fillet radius around the holes less than 50mm;

3. gas hob fitted with a battery is installed in the hole 

of the table;

4. Refer to the connection method and connect the 

gas hob and gas source with the gas special 

connecting pipe. If the rubber pipe is used, please 

use the pipe clamp to fix it firmly and avoid turning 

the gas pipe joint;

5. After installation, carry out gas leakage detection, 

apply soap water on the connection parts, open the 

indoor gas valve and carefully observe whether there 

is a bubble. If bubbles are generated, immediately 

close the indoor gas main valve, and adjust the 

intake connection according to the connection 

method. If there is no bubble, please refer to the 

instruction manual for ignition commissioning; after 

commissioning, make sure that the indoor gas main 

valve is closed.

● 

Gas hobs should strictly follow the 

dimensions specified the diagram and 

keep the distance from combustible 

materials. If it’s surrounded by 

fire-resistant materials, it’s not subject 

to the requirements; if a range hood is 

installed above, it should be 

650-700mm away from the hob 

(specific installation requirements of 

range hood refer to its instruction 

manual).

● 

Gas-dedicated rubber hose

If you select the gas-dedicated rubber hose (length should not 

exceed 1.5m) with diameter of 9.5mm, please connect the 

rubber hose to the intake joint of red marking of gas hob and fix 

it firmly with pipe clamps. The rubber hose used should meet 

the relevant safety standards within service period.

1

2

3

Отзывы: