6
1. Take down all the packing material and packing straps: take down all the packing material and
packing straps used for transportation.
2. Check the accessories delivered with the product: Please check the articles inside the packing box
as per the packing list, and contact the after-sale service in time in case of any discrepancy.
3. Placement conditions: Select the appropriate distance according to the space size.
4. Observation: after leveling and cleaning the body, switch on the power to ensure the normal
operation of the Transport cooler.
Pre-use preparation
11
•Overtemperature alarm function
This product has an over-temperature alarm function. The upper limit of the high-temperature alarm
defaults to 10°C, and the lower limit of the low-temperature alarm defaults to 2°C. When this range
is exceeded, the buzzer alarm starts. At this time, press any key on the left screen to cancel the
buzzer alarm sound (Press the "Function" or "Back" button on the right cold chain screen to cancel
the buzzer). If the alarm condition is not relieved in time (system defaults to 30 minutes), the buzzer
will start again.
•Adjust the set temperature
Long press the "Set" key for 10s and the temperature display window in the left box shows the "St".
Press the "Set" key again and it displays the setting temperature value. Press the "+" or "-" key to
adjust setting temperature value. After completion and 10s no operation, the system saves the set
temperature value, and automatically exits the main interface.
•Power failure prompt function
After the power is cut off, the brightness of the temperature display window in the left box becomes
dark, and at the same time, the temperature value on the left side will be displayed at a certain
frequency (10 seconds On and 3 seconds Off), indicating that the product is in a power-off state.
Please transport the product to the place where it is needed during the period of power cut and
thermal insulation.
•Backup Alarm & display: User Control
When the power is off, press the "set" and "add" buttons for 5 seconds at the same time, the left
screen appears off, and the transport cooler will turn off.
•Restore factory settings
This product does not need to adjust other parameters. If the parameters are confusing due to
incorrect operation, please refer to the following operation mode to restore the factory settings.Press
and hold the "+" button and the "-" button for 20s, the system parameters will be restored to the
default value, and the temperature display window in the left box will display "CL".
Method of Use
