manualshive.com logo in svg

Haier HWT60AA, Руководство пользователя, Страница: 17 / 19

Поделиться
Скачать
Haier HWT60AA Скачать руководство пользователя страница 17

Is the water inlet hose loose?

The water tap leaks.

 

Redistribute the load evenly.

Push the Start/Pause button once.

Level the machine. Push the 

Start/Pause button once.

The display shows E4.

.

Is the water tap closed or

has the water supply been

interrupted?

Is the water inlet valve

blocked?

Is the water pressure too 

low? 

Open the water tap. Push 

the Start/Pause button once.

Clean the water inlet valve

then push the Start/Pause

button once.

Use after the water 

pressure is normal.   

The machine 

does not work.

Will not 

wash

Will not 

spin

There are abnormal

sounds inside the machine.

Is the machine levelled?

Has the laundry been placed

unevenly in the machine?

Are there any foreign objects

inside the tub? 

Level the machine.

Redistribute the load evenly.

Close the top lid.

Remove the foreign object. 

Is the power plug inserted 

tightly?

Is the top lid closed?

Is the laundry distributed 

unevenly in the machine?  

Insert the power plug tightly

.

Close the top lid

.

Redistribute the laundry. 

Close the top lid.Push the

Start/Pause button once.

Is there a power failure?

Is the power plug inserted

tightly?

Has the water level reached

preset position?  

Wait for the power supply 

to be restored.

Insert the power plug tightly

.

Wait for the water to fill to 

the preset level 

Fasten the inlet hose. 

Trouble-shooting

15

If there is a fault or the machine does not operate correctly, remove the power plug 

before checking the machine. Using diagnostic list below, please check if the machine 

requires a repair. If a repair is required, please contact our customer care team, do not 

try to fix it by yourself.

The machine does not drain

or drains slowly. The display

shows E1.

The machine stops running

The display shows E2.

The machine does not spin

The display shows Ob.

Has the laundry been placed

unevenly in the machine?

Is the machine level?

Is the drain hose blocked?

The top lid is not closed.

Remove the blockage. Push

the Start/Pause button once.

Close the top lid. Push the

Start/Pause button once.

Problem

Possible causes

What to do

Содержание HWT60AA




















Отзывы:

Нет отзывов