Haier HWO60S10TPB2, Инструкция пользователя

Страница: 10 / 30

• No additional operation/setting is required in order
to operate the appliance at the rated frequencies.
• lf the power cable is damaged, it should be
substituted with a cable or special bundle available
from the manufacturer or by contacting the customer
service department. The type of power cable must be
H05V2V2-F. This operation should be carried out by a
suitably qualified professional. The earth conductor
(yellow-green) must be approximately 10 mm longer
than the other conductors. For any repairs, refer only
to the Customer Care Department and request the
use of original spare parts. Failure to comply with the
above can compromise the safety of the appliance
and invalidate the guarantee.
• The oven must be switched off before removing the
removable parts. After cleaning, reassemble them
according the instructions.
• WARNING: Never remove the oven door seal.
• When inserting the grid tray pay attention that the
anti-slide edge is positioned rearwards and upwards
• The appliance must not be installed behind a
decorative door in order to avoid overheating.
• Excess spillage must be removed before cleaning
using a self-clean cycle.
• Before starting a self-clean cycle, remove oven
shelves and all other cookware and/or utensils and
accessories, and wipe up large food spills or grease
EN 10
SAFETY AND WARNINGS