安 装 位 置 的 调 整
4
Please install and adjust the machine according to the requirement of
the manual. It is very important to your security and correct
operating the machine.
Installation and adjustment
Overflow filter
Lint filter
After opening the package, please take out the lint
filter from the document bag, install it to the overflow
filter of the wash tub. See to the figure.
Install the lint filter
After opening the package, please lean the washing
machine gently down on soft items (like towel cloth,
blanket, etc.). Install the bottom plate to the bottom of
the machine with five screws by a cross screw driver,
then lift the machine up gently. See to the figure:
Bottom plate
Back
Front
Soft items
Screw
Install the bottom plate
Usage the drain hose
The drainage shall be smooth with the drain hose.
1.
The height of the drain hose shall be less than
10cm, or the drainage will not be smooth, and cost
such long time that the machine may stop at mid
way.
2.
Do not step on or press the drain hose.
4.
If extra drain hose is needed, please make separate
purchase. The inner diameter of the extra hose shall
not less than 30mm, and the length shall not exceed
1.5m.
If the extra hose is too long, cut
it either at A or at B point.
A
B
<10cm
A
> 30mm
<1.5m
3.
If the drain hose is too long, cut it at mid point. To make
smooth drainage, cut the front end of the hose slantingly.
5.