Haier HWM90-96A, Руководство пользователя, Страница: 8 / 11

Connection between the water inlet hose and the washer
Dismantle the water inlet hose
Connection between the jointer of the water inlet hose
and the water inlet hose
Check the connection between the jointer of the water inlet hose
and the water faucet
1. Do not take off the water absorption cushion. Please check if the
cushion is dropped or damaged before each usage. If it happens
please contact our after-sale department immediately.
1. Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
1. Push down the slider. Insert the water inlet hose into the jointer.
2 Hang the lock lever to the jointer. Release the slider till a click sound is heard.
Locking level
Slider
water absorption cushion.
nut of the water inlet hose
the jointer of the water inlet hose
Slider
Locking level
jointer of the water inlet valve
1. Close the water faucet.
2. Press the locking lever. Push down the slider. Then pull of the water inlet hose.
If the machine is used frequently, the jointer of the water inlet hose can be kept
on the faucet to prevent damaging the fixing screw.
2 Put the nut of the water inlet hose on the valve jointer.
3 Fasten the nut. Swing it gently to confirm if it's suitable.
4.Before each usage please check if the connection
between the jointer of the water inlet hose and the
water faucet, and the installation of the water inlet
hose are firm, so as to prevent dropping from
improper installation position.
Remarks:
use the new hose sets supplied with the washer.
Any other old hose sets should not be used.
Before Using Before Using
6
Page 16
This function is used to protect the children and prevent them from changing the washing
procedure.
Start up:The program is optional anytime after the machine has been starded.
Push and hold the
WATER LEVEL button and SPIN button for more than 3 seconds at the same time.After a
beep sound,the child safety lock program works;all buttons are locked and cannot be selected.
During this period, when open the top lid, the machine will give a beep alarm. 15 seconds later
,no matter opening or closing the top lid, the machine goes on alarming and drains water.After
draining, 10 minutes later power off automatically.
Child lock function
Push the POWER ON/OFF button to switch on
the power. When the power is on, push it again
to switch off the power.
Push the POWER ON/OFF button to switch on
the power. If the START/PAUSE button is not
pushed, the washing machine will automatically
switch off the power after 5 minutes.
Power On/Off button
During sensing, it displays --
During reserve procedure, it displays the remained reserve time (in hour)
During operation of programs, it displays the remained time (minute). If the remained time exceeds 99 minutes,
it adopts A at tens place to represent 100 minutes, b to represent 110 minutes. For instance, A3 represents 103 minutes.
In case of abnormal phenomenon, it displays the abnormal symbol (see to Page 16)
Reserve/remain time indicator digitron
In standard operation mode,
the reserve indicator light
is off. The time remain
indicator light is on. The
digitron displays the time
remained (in minute) before
the washing is finished.
Push down the RESERVE
button. The digitron displays
the reserve time of finishing
washing(in hour).When the
machine is started, the
reserve indicator light is on,
indicating that the reserve
function is running and other
lights are off.
RESERVE button
If the standard program,t he washing machine can detect
the laundries automatically.After detection, it will set the water
level to suitable value among 4, 6, 8,and 10 automatically.
You can also set water level by yourself. After the machine is
started, it will not set water level automatically. You shall push
the START/PAUSE button to make new setting.
If there's water inside the tub, the machine cannot detect the
laundries and will display water level 6 .
If wet laundries are put in, it may display water level 10 . You
must set suitable water level by yourself.
If SAVE program is selected, it will display water level 2 .the
water is never to be changed,When water level 2 is reached
in water filling, it will perform washing while filling water. When
water level 3 is reached,it will change to standard washing.
During the program of the woolen or the dry-cleaning , it will
display water level 10 .the water level is selected from 8 to10;
During operation of wash and rinse program, you can push
down the water level button to add water. When you release
the button, or it reaches the overflow water level, the machine
will stop adding water . The water level decided may be
different from actual value because of the different moisture
level of the laundries.
WATER LEVEL button
Start/Pause button
After the power is switched on, push it to
Start the machine
During working, push it to pause working.
During pause, push it to resume working.
PROGRAM selection button
Following automatic programs are available for selection
Program Applicable situation
Standard
Common washing
Save
Quick and high-efficiency wash for
common laundries
Blanket Washing the relatively big and thick laundriesr
Dry-cleaning
Washing for laundries requiring dry-clean
(see to dry-clean description and No.12
of the points of attention for details)
Cotton
Woollen
Silk
Washing the cotton textiles
Washing the woolen textiles
Washing the textile
Using process Using process
11
WATER LEVEL
START
PAUSE
POWER
ON/OFF
PROGRAM
RESERVE
RESERVE(HOURS LATER)
TIME REMAINED(MINUTES)
(18L)
MIN
COTTON
TUB CLEAN
SILK
BLANKET
SAVE
DRY-CLEANING
WOOLLEN
STANDARD STANDARD
Avoid growing mildew on the outer tub
and the inner tub
Tub clean
Release:push and hold
,
WATER LEVEL button and SPIN button for more than 3
seconds at the same time.After a beep sound the child safety lock program is
released;all buttons are unlocked.