manualshive.com logo in svg

Haier HWM90-23BS, Руководство пользователя, Страница: 6 / 18

Поделиться
Скачать
Haier HWM90-23BS Скачать руководство пользователя страница 6

4

Installation and adjustment

Please  install and adjust the machine according to the requirement of
the manual. It  is very  important  to your security  and  correct operating 
 the machine.

Install the water inlet hose; Select the water level

Use  the new water inlet hose provided with the 
machine to connect to the water faucet.
 Old hose sets should not be reused.

Usage of the drain hose

Water inlet hose

 Water-filling

   entrance

Maximum

Max

(About 79L)

Medium

(about 66L)

   Minimum

(About 48L)

Medium

   Min

  Water-filling

entrance cover

The drainage shall be smooth with  the drain hose.

4.If  extra  drain  hose is  needed ,  the  inner
   diameter  of  the  extra hose  shall  not less
   than 30mm, and the length shall not exceed
   1.5m.

<10cm

>   30mm

<1.5m

1.The  height   of  the drain  hose  shall be
   less  than  10cm ,  or   the  drainage  will
   not  be  smooth  enough  and  cause
   incomplete  drainage.

2.Do not step on  or  press  the  drain hose.

3 If the drain hose is too long, cut it at mid
   point. To make smooth drainage, cut the 
   front end of the hose slantingly.

Attention:
       In water filling, do not exceed 
the"Maximum"  water level. Otherwise
 the water may overflow out of the 
washing machine.

Select water level according to the
quantity of the laundries.

Insert the water inlet hose into the water-filling
entrance on the control panel directly.   (pull it 
out to dismantle it)

Install the lint filter

After openning the package,please take out the lint
filter from the document bag,install it to the filter frame
of the cabinet.See to the figure.

Filter frame

Lint filter

Содержание HWM90-23BS



















Отзывы:

Нет отзывов