Haier HWM8000 Скачать руководство пользователя страница 10

1 Preparation before washing

Pay attention to the followings before washing

Preparation before washing

1 Connect the water inlet hose. Open the water faucet.

2 Confirm that the washing machine is earthed reliably.

   Then plug the power plug into the receptacle. The

   earthing terminal shall not link to gas pipeline and

    faucet water pipeline.

3 Put down the drain hose.

Check   if 
the laundries 
have special 
r e q u i r e m e n t
o n   w a s h i n g

C l e a r   t h e  
pocket. Take 
out the coins, 
sand, hairpins 
etc.

Tie the long 
strips; fasten 
t h e   b u t t o n s ;  
close zippers.

When the pulsator
is running ,the
buttons   of   the 
l a u n d r i e s

m a y

cause noise. For 
t h e   s a k e   o f  
discretion, please
put the laundries
with buttons  into 
other laundries.

The quantity of 
the    laundries
shall not be too
large.    Stretch
and  loosen the 
laundries before
putting  them in
the tub.

a. Check if the laundries are applicable for washing with machine.
b. Divide the laundries that are not colorfast from other laundries.
c. Put the laundries difficult to absorb water into water with hand.
d. For the laundries with heavy soil, please first remove the dirt like mud or dust. 
    For the parts with heavy soil, please apply detergent on them in advance, which
    can make it easier to remove the soil.
e. For the laundries that may get lint ball and those with long fur, turn it over before 
    putting in.
f.  Do not put the laundries polluted by chemicals into the washing machine directly.

4.Slanting  or  uneven  ground  may  result  in unstable
   working or abnormal noise. Please make the machine
   stand horizontally.

8

Содержание HWM8000



















Отзывы: