14
3. No rotation in washing (or rotate to one direction only)
Start the test without water.
Enter no-water washing.
Check the action of the
motor.
Measure the voltage of the
two ends of the motor.
Measure the voltage
of the two ends of the output of
the computer sequencer.
If the motor overheat
protector acts?
If the capacitor has broken
circuit or short circuit?
Please check the transmission
system carefully.
If it is normal of the bearing part
locking the clutch.
Please check
the reason.
Replace the
capacitor.
Replace the
wire unit.
Replace the motor.
Replace the computer sequencer.
It acts.
Exist
Exist
No
No
Not exist
Yes
Yes
Not exist
Not exist
Measure the voltage
of the two ends of the
computer sequencer?
Replace the wire unit.
Replace the computer sequencer.
At this time please check if the
water inlet valve works normally.
At this time please check if the
capacitor and motor works normally.
2. No water filling
Switch on the power. Push
the "Start/Pause" button.
Confirm the action sound
of the water inlet valve?
Measure the voltage
of the two ends of the
water inlet valve?
Remove the foreign materials of the water
inlet valve filter screen or raise the water
pressure to 0.03Mpa-0.78MPa before use.
Replace the water inlet valve.
There is Sound
There is voltage
There is no Sound
There is no voltage
There is no voltage
There is voltage
Model:HWM80-0566