Connection between the water inlet hose and the washer
Dismantle the water inlet hose
Connection between the jointer of the water inlet hose
and the water inlet hose
Check the connection between the jointer of the water inlet hose
and the water faucet
1.
Do not take off the water absorption cushion. Please check if the
cushion is dropped or damaged before each usage. If it happens
please contact our after-sale department immediately.
1.
Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
1.
Push down the slider. Insert the water inlet hose into the jointer.
2 Hang the lock lever to the jointer. Release the slider till a click
sound is heard.
Locking level
Slider
water absorption
cushion.
nut of the water
inlet hose
the jointer of the
water inlet hose
Slider
Locking level
jointer of the
water inlet valve
1.
Close the water faucet.
2. Press the locking lever. Push down the slider. Then pull of the water inlet
hose.
If the machine is used frequently, the jointer of the water inlet hose can be
kept on the faucet to prevent damaging the fixing screw.
Before Using
Before Using
2 Put the nut of the water inlet hose on the valve jointer.
3 Fasten the nut. Swing it gently to confirm if it's suitable.
4.Before each usage please check if the connection
between the jointer of the water inlet hose and the
water faucet, and the installation of the water inlet
hose are firm, so as to prevent dropping from
improper installation position.
The washing machine can detect the laundries automatically. After detection,it will
set the water level to suitable value among 4, 6, 8,and 10 automatically.
You can also set water level by self. After the machine is started, it will not set water
level automatically. You shall push the start/pause button to make new setting.
If there's water inside the tub, the machine cannot detect the laundries and will
display water level 6 .
If wet laundries are put in, it may display water level 10 . You must set suitable
water level by self.
If super quick program is selected, it will display water level 3 . When water level
2 is reached in water filling, it will perform washing while filling water.
When water level 3 is reached, it will change to normal washing.
During operation of wash and rinse program, you can push down the water level
button to add water. When you release the button, or it reaches the overflow water
level, the machine will stop adding water.
The water level decided may be different from actual value because of the different
moisture level of the laundries.
Start/Pause button
Push the On/Off button to switch on the power.
When the power is on, push it again to switch off
the power.
Push the On/Off button to switch on the power.
If the start/pause button is not pushed, the
washing machine will automatically switch off
the power after 5 minutes.
10
8
6
4
2
9
7
5
3
1
» ¯Ï Ë
à ÞÖ ¯
·
à «Ö ¯
·
Ë ¿Ö ¯
·
μ çÔ ´
ô ¯
Ô ÝÍ £
³ ÌÐ ò
Ô ¤Ô ¼
Ë ®Î »
Ê £Ó à
(· ÖÖ Ó)
Ê £Ó à
(· ÖÖ Ó)
Ô ¤Ô ¼
(Ð ¡Ê ±)
Ô ¤Ô ¼
(Ð ¡Ê ±)
± ê
¼
¿ ìË
Ù
Ì Ø¿
ì
£ Ð
Í ¯Ë ø
During operation of programs, it displays the remained time
(minute). If the remained time exceeds99 minutes,it adopts A at
tens place to represent 100 minutes, B to represent 110 minutes.
For instance, A3 represents 103 minutes.
In case of abnormal phenomenon, it displays the abnormal
symbol (see to Page 16)
Page16
Reserve/remain time indicator digitron
START
PAUSE
POWER
ON/OFF
RESERVE
WATER LEVEL
PROGRAM
FIBRE
COTT
ON
WOO
LLEN
SILK
NORMAL
QUICK
POSTHASTE
SOAK W
ASH
Reserve
Reserve
In normal operation mode, the reserve indicator light is off. The time remain indicator light is on.
The digitron displays the time remained (in minute) before the washing is finished.
Push down the reserve button. The reserve indicator light is on The digitron displays the reserve time of
finishing washing (in hour). When the machine is started, the reserve indicator light is on, indicatingthat
the reserve function is running.
After the power is switched on, push it to
Start the machine
During working, push it to pause working.
During pause, push it to resume working.
Reserve button
Water level button
Program selection button
Following automatic programs are available
for selection
Program
Applicable situation
Standard
Common washing
Quick
Quick and high-efficiency wash for
common laundries
Super
quick
Super quick wash of the laundry
under 1 kg with light soil
Jeans
Washing the relatively big and
thick laundriesr
Chemical
fiber
Washing the chimical fiber
laundries
Cotton
Washing the cotton textiles
Power On/Off button
Washing the textile
Washing the woolen textiles
Silk
Wool
Reserve
Hours later
Time remained
Minutes
XQS50-28
