Haier HWM200-B1678S Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 22

Haier HWM200-B1678S Скачать руководство пользователя страница 10

Installation & Adjustment

Connection between the water inlet hose and the washer

1.Do not take off the water absorption cushion.

Please check if the cushion is dropped or

damaged before each usage.If it happens

please contact our after-sale department

immediately.
2.Put the nut of the water inlet hose on the

valve jointer.
3.Fasten the nut. Swing it gently to confirm if it’s suitable.

nut of the water inlet hose

jointer of the water inlet valve

water absorption cushion

7

The new hose-sets supplied with the appliance are to be

used and that old hose-sets should not be reused.

1.Connect the water inlet hose to the water tap. You may have
to use pliers to tighten the coupling. Do not over tighten as this may
cause damage to the valve or hose fittings.

2. Connect the other ends to their respective cold and hot water inlet valves

Nut of the water inlet hose

to Joiner of the water inlet valve

Water absorption cushion

3. Fasten each hose on the washing machine and ensure a tight connection.

«
...
8
9
10
11
12
...
»

Содержание HWM200-B1678S























Отзывы:

Нет отзывов