Haier HWM1480KFL, Руководство пользователя, Страница: 8 / 17

When you press this button, the washing machine performs extra rinses. When the button is
pressed one time, the screen displays " - ", and one time of extra rinse is selected, if go on
pressing the button, the screen will display " - "or" - ", with meaning of two or three times of
performs extra rinses . When the button is pressed, the "Extra rinse" light goes on, when the
extra rinse is performed, the light flashes, and "-/ /
" is displayed at times. When the extra
rinse ends, the light turns off, and "-/ / " disappers.
ECO
you can press "start/pause
”
button 2 second to unlocked and open the door if status allow door open
(water level lower than the bottom of the door level,water temperature lower than 50
℃
,motor stop).
Turn the program knob clockwise/anti-clockwise to select your desired
wash program.
(Refer to "Guide to Operation Program Selection")
This button is used to start or pause a
wash cycle.
This option will allow you to delay your start operation. The range in delay times is 30 minutes - 24
hours; each touch of this button will increase in increments of 30 minutes. After you have selected
you desired delay time, press the Start/Pause button to start the countdown of the set time (the time is
displayed on the LCD display until the delay program ends).
This option can not be selected in the Rinse, Spin and Drain programs.
Select this option after you have selected your desired wash program. This option allows
you to wash using your desired wash program, but dependant on your wash load. There are
three level. Level one being a light load. Level 3 being a full complete load. Select this
option depending on your load.
Control Panel
Control Panel Operating Functions