Haier HWM130-9188 Скачать руководство пользователя страница 11

1.Prepare warm water of 30 C and container.

2. Add washing powder while stirring to dissolve it completely.

The capacity of washing and spinning of the machine

 refer to the largest weight of the standard laundries

 under dry condition .

that can be washed or spinning in one time. One time 

washing quantity shall be lower than the rated capacity. 

The largest capacity of this machine is 13.0kg.
The thickness, size, type of the cloth will influence the

 actual washing capacity. It is suitable for one time 

washing to put in reasonable amount of laundries 

and the laundries can be turned round in washing.

 Do not select  above 8 water level for laundries small 

than 2.0kg, so as to avoid splashing of water.

Usage of the detergent

 Put in the laundries

9

Control  panel  seat

Washing powder inlet

Softener inlet 

Bleach Inlet

Detergent box

Liquid detergent box

How to use washing powder

Washing powder with poor quality or long-time storage may

get caked. Please clean the detergent box duly  in usage.

Dissolve directly inside the washing machine: (not

applicable for fuzzy and reserve program)

1.Add some water (select " 1 " water level). 

2.Add washing powder. Run for about 30s to fully dissolve

   the Powder. Then push the "START/HOLD" button. 

3.Put in laundries. Select suitable water level. Push the

  "START/HOLD" b

utton again.

Quick dissolving of washing powder:

It is not recommended to use rich-foam washing powder.

If you select 

program, it is suggested to use

liquid detergent instead of washing powder to guarantee

the washing effect.

"SPEEDY"

 

Please add suitable washing powder as per the laundries

 quantity, the set water level and water quantity.

It is suggested to add washing powder into the box

directly under fuzzy program and reserve program.

How to use whitener

The whitener shall not touch laundries directly.

Add water to stipulated level. Dilute the whitener with container, 
and then pour it into the liquid whitener inlet slowly.

Laundries with color or pattern is not colorfast, thus not applicable. 

For whitener in powder, dissolve it before use.

See to the manual of whitener for the usage and dosage.

The usage and dose of the softener as per the specifications of softener.

Before washing put the softener into the detergent box directly as 

indicated in the left figure The softener will put into the washer 

when the last rinsing. 

After that,please close the detergent box Refer to the following list for

 the usage of the detergent: selection of the water level,water quantity 

and dosage of detergent

After the softener is put in, please don't place for a long time otherwise

softener may solidify and cause flowing not smooth. 

How to use liquid detergent 

Before washing put the 

 into the 

directly as indicated  the above figure. 

liquid detergent 

liquid 

detergent box 

The usage and dose of the liquid detergent as per the 

specifications of liquid detergent.

Put the liquid detergent box on the left of the detergent 

box. See the above figure.

                         

 

                          

Содержание HWM130-9188





















Отзывы: