Haier HWM130-0677 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 20

Haier HWM130-0677 Скачать руководство пользователя страница 13

12

Washer load may need to be re-balanced, as the load may be
uneven.

Coins, loose change, buttons or other heavy objects could create
noise related sounds(read Operating Guide-Normal Operating Sounds).

Squealing sound: Due to overloaded wash tub.

Vibration Noise: may be caused by not leveling washer properly
on the floor or uneven distribution of clothes in the tub.

LED Display Notes:

Reasons
Top lid not closed during delay start sequence
Blockage of drain hose
Top lid not closed during wash operation
The water inlet time exceeds the preset time
(30minutes)
PCB communication error

ater overflow protection

W

Trouble Codes

E0
E1
E2

E4

E7

F2

Problems with clothes:

Clothes become excessively creased: this is due to improper sorting,
overloading or washing in too hot water repeatedly. Avoid
overloading and resort your load. Wash in cooler water.

Soap residue: detergent may not be dissolved in water.
Check water temperature, add detergent as wash tub is being filled
with water. Reduce detergent dosage or pre-dissolve detergent
before adding to wash.

Spots or stains on your clothes: this is due to incorrect use of
fabric softener. Refer to manufacturers instructions on the
container and follow directions.

Clothes are grayed or yellowed: this may be due to not using
sufficient detergent for large loads. Add more detergent to the load.

Clothes are ripped & have holes/excessive wear & tear: this may be
due to sharp objects left in washing. Remove all small loose sharp
objects, fasten belts, zippers, metal snaps etc. Check if you are
using undiluted bleach. Never add undiluted bleach to wash.

«
...
11
12
13
14
15
...
»

Содержание HWM130-0677





















Отзывы:

Нет отзывов