Haier HWM120-1678ES5 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 20

Haier HWM120-1678ES5 Скачать руководство пользователя страница 8

Installation & Adjustment

Position the drain hose

Inlet pipe connection

1.Do not let the drain hose run over

doorsills that protrude 10cm from the

floor.

2.Do not trample on the drain hose.

3.Cut the excessive part if needed.

4.If extra drain hose is needed, please

make separate purchase.The inner

diameter of the extra hose shall not

less than 30mm,and the length shall

not exceed 1.5m.

5.If the extra hose is too long, cut it either

at A or at B point.

Note:

The new water inlet hose supplied with the appliance is to be used and the old

water inlet hose should not be reused.

A

B

The new hose-sets supplied with the appliance are to be used and that old hose-sets

should not be reused.

Connect the water faucet

It is required that the front end shall be longer than 10mm.
The exit end face of the faucet shall be flat and smooth. If not please file it to avoid

leakage.

The exit end face of the faucet

water faucet,suitable

water faucet, not suitable

6

≤1.5m

«
...
6
7
8
9
10
...
»

Содержание HWM120-1678ES5





















Отзывы:

Нет отзывов