manualshive.com logo in svg

Haier HWM105-M186, Руководство пользователя, Страница: 3 / 20

Поделиться
Скачать
Haier HWM105-M186 Скачать руководство пользователя страница 3

Safety precautions

Meaning and description of the symbols

Warning sign

Forbidden sign

Contents marked with this symbol are related to the safe use of 

the product and the personal safety of the user. 
Please operate in accordance to the contents of this manual,to 

avoid harm to the user or damage to the machine itself.  

Contents marked with this symbol indicate operations or actions 

that should not be undertaken by the user. 
Performing of such actions may result an injury to the user or 

damage to machine itself,and void warranty. 

Please insert the power cord into a rated 

voltage outlet.Be sure to use a single

-phase three pin outlet.Also,the terminal 

of the outlet must be grounded.If possible,

please install an electric leakage protector.

If the supply cord is damaged,it must be

replaced by the manufacturer,its service

agent or similarly qualified persons in 

order to avoid a hazard.

Use only the supplied hose set for the

connection.

Never reuse old hose sets!

When the machine is in use,place the 

power plug in a location where it can be

easily inserted and extracted by hand.Be

sure to remove the plug if power failure 

occurs,when moving or cleaning the 

machine,or when the machine is idle.

Do not place the machine in a damp place

like the bathroom and never wash it with

water.Do not place wet laundry on the

control panel. 

Do not use water warmer than 50

°C.

To avoid abnormal vibrations in spinning,

do not use the machine to wash water

-proof laundries like raincoats,bike covers 

etc.

If the washing machine is installed on the

ground near carpet,make sure to keep the

ventilation hole clear of obstruction.

 

Ventilation hole atthe 

bottom of the 

washing machine

Содержание HWM105-M186





















Отзывы:

Нет отзывов