How to change the direction of the drain hoses
Figure 1 indicates the ex factory installation
position of the drain hose.
Put soft items on the ground. Lean the machine
down gently with the front surface facing the
ground. Take off the drain hose from the cabinet.
Take the hose out of the fixing groove.
(See to Figure 2).
Embed the drain hose into the groove along the
side of the spin tub in the order of (1)~(3), heading
for the side of the spin tub. (See to Figure 3).
Embed the drain hose into the groove with
hands. Take care not to damage the drain
hose in fastening the fixing clamp.
Figure 1
Figure 3
Figure 4
Embed into the
groove in turn
Extend the drain hose from the side of spin tub
Figure 2
Soft item
Extend to the
spin tub side
Take out the drain hose from the fixing groove.
Extend it from the rear side as per the direction
of the arrow. (When the drain hose is extended
from the rear side, it can be hung on the
point for drain hose at the two sides of the cabinet.)
(See to Figure 4).
Soft item
Back
Front
Extend the drain hose from the rear side
Install the water inlet hose; Select the water level
5
Select water level according to the
quantity of the laundries.
Turn off the tap when the water
reached the appropriate level.
Insert the water inlet hose into the water-filling
entrance on the control panel.
Water inlet hose
Water inlet
Water level
indicator
Figure 4
WASH SELECTOR
Washing sequence
Figure 1
Spin timer
SPIN TIMER
Wash timer
WASH TIMER
WASH SELECTOR
Wash selector
(To set to below 2 minute,
first set to 5 minute then
turn it back. it can increase
the service life of the timer).
(Standard current,
strong current)
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
Wash
Figure 3
WASH TIMER
Figure 2
WASH SELECTOR
1. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 1)
Run washing program for some time to stir and
dissolve the powder completely.
2.Put in the laundries. If the water quantity is
insufficient, please add water.
3.Select the current.
Select the strength of the current according to
the laundries. (Figure 2)
4.Select the washing time
Select the washing time according to the
laundries. (Figure 3)
5.After washing, set the "WASH SELECTOR"
at "DRAIN". (Figure 4).
Water inlet
8
OFF
STRONG
OFF
DRAIN
STANDARD
STRONG
OFF
DRAIN
STANDARD
STRONG
Ç ¿ Ï ´
± ê × ¼
Å Å Ë ®
DRAIN
STANDARD
Ç ¿ Ï ´
± ê × ¼
Å Å Ë ®
Ç ¿ Ï ´
± ê × ¼
Å Å Ë ®