Even there's no water in the tub, the
spinning will start after a certain period.
Do not use the "twice wash" program for
the woolen laundries.
Wash the laundries that are prone to lose
colors separately from other laundries.
The pulsator will not rotate unless the
water is filled to selected water level.
Selection method of the procedure programs
Time list of each program (minute)
Times of pushing
the "procedure
selection" button
If you push the "Procedure selection" button for 7 times, it will resume the original
mode, and it will circulate like that.
If you select the "Quick wash" program, you have to set the full procedure of wash,
rinse and spin. The procedure can not be selected.
Selected procedure
program
Applicable procedure
Contents (the lighted indicators indicate
the programs about to run)
Wash, rinse, spin
(standard program)
Rinse, spin
Spin (spin after drain)
Wash (the washing
liquid remains in the tub)
Wash, rinse (the rinsing
liquid remains in the tub)
Repeat using the washing liquid
Wash rinse spin
Wash rinse spin
Wash rinse spin
Wash rinse spin
Wash rinse spin
Wash rinse spin
Wash rinse spin
Twice
wash
Twice
wash
Twice
wash
Twice
wash
Twice
wash
Twice
wash
Twice
wash
Quick
wash
Quick
wash
Quick
wash
Quick
wash
Quick
wash
Quick
wash
Quick
wash
Twice wash, wash, rinse,
spin
Quick wash, wash, rinse,
spin
When the common laundries
need washing, rinsing and
spinning
Repeat using the washing liquid
When the laundries need rinsing
and spinning after manual
washing
When the laundries need only
spinning after manual washing
(first drain then spin)
If the laundries are very dirty, or
the sleeve and collar are dirty,
first soak then wash
When quickly wash the light
dirty laundries
Attention
Standard
Program
Twice wash
Quick
Soak (min)
Wash (min)
About 8~15
About 35~42
About 4
About 4
About 4
About 16~30
About 68~82
About 25
About 5~9
About 21~25
Rinse (min/time)
Spin (min)
Total time (min)
Rinse twice with stored
water, about 6
Rinse twice with stored
water, about 6
Rinse once with stored
water, about 3
Using process
Using process
