16
Cleaning and Care
A er washing
Turn o the water supply and remove the electrical
plug
each wash. Open the washer door to prevent
form on of moisture and odors. If the washing
machine is
idle for a long period, drain the water
in the machine and replace the drain hose.
Cleaning the detergent drawer
Clean the detergent distribu on drawer regularly.
Pull out the dra
sh it clean with water and then replace it.
Cleaning the machine
Unplug the machine during cleaning and maintenance. Use a so cloth dampened with soap liquid to
clean the machine case and rubber components. Do not use
organic chemicals or corrosive solvents.
Clean the lter once a month:
Open the bo om cover.
Remove
ter by turning counterclockwise.
r clean with running water.
Replace
ter by turning clockwise and remount the cover.
r must be in place, or it may lead to leakage.
Place a container under th
ter, to collect any excess water that may come out
of the drain pump
Maintenance
17
Water inlet valve and inlet valve
r
To prevent blockage to the water supply by ingress of foreign
substances, clean the water inlet valve and inlet valve
regularly.
Moving the machine
Remove the back cover.
Remove the blanking plugs.
Tighten the bolts with a spanner.
Replace the back cover.
Long periods of disuse
ll out the electrical plug and turn o
he water
moisture and odors. Leave the door
open while
not used.
Display Codes
Maintenance
Codes
Causes
E2
Door is not properly shut.
Shut the door properly, and then press the
F3
Temperature sensor not properly
connected or damaged.
Contact the maintenance personnel.
F4
Heater error (Appears at the end of a
cycle).
Contact the maintenance personnel.
E4
Water level not met in 7/8/10
minutes.
The height of the drain hose is below 80
cm.
The drain hose is in water.
Make sure that tap is turned on, and water
pressure is normal.
maintenance personnel.
Install drain hose within 80-100 cm of
height.
Make sure the drain hose is not in water.
E1
6 minutes.
Clean the fi
lter and check the drain hose
contact the maintenance personnel.