Haier HWD80-BP14636, Руководство пользователя

Страница: 27 / 64

27
-
ance, disconnect the power supply and contact the customer service.
Problem Cause Solution
Excessive foam fl oats
drum and/or deter-
gent drawer.
• Detergent is not a appropriate
• Excessive use of detergent.
• Check detergent recommen-
dations.
• Reduce amount of detergent.
Automatic adjustment
of washing time. • Washing programme duration will be
adjusted.
• This is normal and doesn‘t af-
fect functionality.
Spinning fails. • Unbalance of laundry. • Check machine load and laun-
dry and run a spinning pro-
gramme again.
Unsatisfactory wash-
ing result • Degree of pollution does not agree with
selected programme.
• D
• Maximum load has been exceeded.
• Laundry was unevenly distributed in the
drum..
• Select an other programme.
• Choose the detergent acc.to the
degree of pollution and acc. to
• Reduce loading.
• Loose the laundry.
Washing powder
residues are on the
laundry.
• Insoluble particles of detergent can re-
main as white spots on the laundry.
• Perform extra rinse.
• Try to brush the points from the dry
laundry.
• Choose an other detergent.
Laundry has grey
patches. • Caused by fats such as oils, creams or
ointments
• Pretreat the laundry with a special
cleaner.
Note: Foam formation
If too much foam is inspected during spin cycle, motor stops and drain pump will be ac-
tivated for 90 seconds. If that elimination of foam fails up to 3 times, programme ends
without spinning.
9.4 In case of power failure
The current programme and its setting will be saved.
When power supply is restored operation will be resumed.
In case of power failure during programme run door
opening is mechanically blocked. If the laundry is to
be removed, the water level must not be visible in the
glass door. - Danger of scalding!
▶
Lower the water level according to step 1 to 6 of
chapter CARE AN CLEANING (PUMP FILTER).
▶
Pull lever (A) beneath service fl ap (Fig. 9-4) until
door is unlocked by a gentle click.
▶
Fix all parts and close the service fl ap.
A
9-4
GB
9- Troubleshooting