Haier HWD1600, Руководство по обслуживанию

Страница: 23 / 28

SERVICE MANUAL
HWD1600
Front Load Clothes Washer & Dryer Combo
Er12
Er13
Failure information: waterlevel abnormity during drying cycle
There are several reasons at it:
1. The drain pump is broken;
2.The connection between drain pump and the wire is abnormal; 3. The
amount of water flowing adapter is too much; 4.PCB is broken.
Failure information: Sheathed Heating Elements or drying
motor abnormity.
There are several reasons at it:
1. Thermal link is broken;
2.The connection between thermal link and wire is not suitable; 3. Sheathed
heating elements is broken; 4. The connection between sheathed heating elements and wire is not suitable;
5. Thermostat is broken;
6. The connection between thermostat and wire is not suitable; 7.PCB is broken.
Error message:
The water level sensor circuit short cut or open
Troubleshooting:
N
Y
Connect well
Check if the wire of water levle sensor
is connected properly
it
N
Y
Check if the water levle sensor
is damaged
Replace it
Replace PCB