
Clean Drain Filter (at least one time every 30 days)
15. Cleaning/Maintenance
①
Start the only dehydration procedure to conduct the drainage.
②
After water is discharged from the washing machine, please insert a proper coin,
a plain-end screw driver or other tools into the groove on the right side of the
filter cover, and the filter cover is pressed rightwards and opened leftwards.
③
Slightly pull a residual water pipe out , take the residual water pipe cover off,
and completely discharge water left in the pipe. And then block the residual
water pipe cover, place the residual water pipe in place and clamp it.
Note: It is not allowed to pull the residual water pipe with excessive force,
otherwise, it is easy to result in damage to the residual water pipe and water
leakage. Please firmly block the residual water pipe cover, otherwise, it is easy
to lead to water leakage.
④
Take the filter out by twisting the filter handle with hands in counter-clockwise
direction.
⑤
Remove thread ends and sundries on the filter and clean the filter with clear
water.
⑥
Insert the filter along the direction of the groove and tightly screw the filter
clockwise.
⑦
Check whether is the residual water pipe cover is blocked and cover the filter.
Clean Detergent Dispenser Box
①
Outwards pull the detergent dispenser box to the end, as shown in Figure 1.
②
Press the middle “PUSH” mark and slightly press it downwards to take the
dispenser box out.
③
Clean the dispenser box and the siphon cap with clear water.
④
Re-buckle the siphon cap and horizontally push the dispenser box inwards and
close it.
Clean Filtering Net at joint of Water Inlet Valve
Kindly reminder: to improve the washing effect, please do not throw away the
filtering net at the water inlet.
In case of unsmooth water inflowing, please timely clean the filtering net at the
water inlet. The specific operations are as follows:
①
Unscrew the water inlet pipe, as shown in Figure 1;
②
Take the filtering net out with nose pliers, as shown in Figure 2;
③
Clean the filtering net with a soft bristle brush, as shown in Figure 3;
④
Assembly the filtering net, as shown in Figure 4;
⑤
Reconnect the water inlet pipe, as shown in Figure 5;
Please unplug the power plug from the socket before cleaning and maintenance.
Filter cover
Filter handle
Residual water pipe
Siphon cap
“PUSH” mark
Residual
water pipe cover
Figure 1
Figure 2
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
21