Haier HWC-22BW, Инструкция пользователя

Страница: 7 / 11

CHANGING THE LIGHT BULB
CARE AND MAINTENANCE
To accommodate different size bottles, the shelves
can be moved up or down by sliding them out the tracks first. Shelves are
designed to accommodate maximum amount of bottles.
Shelves
6
Before removing the light bulb, either unplug the refrigerator or disconnect
the electricity leading into the refrigerator at the main power supply. Failure
to do so could result in electrical shock or personal injury.
All parts removed must be saved to do the replacement of the light bulb.
NOTE:
Light bulb should not exceed 5 watts.
It may also be necessary to periodically wipe the bottom part of the storage
area,as the beverage center is designed to retain humidity, and condensation
may collect there.
Most power failures are corrected within a few hours and should not
affect the temperature of your beverage center if you minimize the number
of times the door is opened. If the power is going to be off for a longer
period of time, you need to take the proper steps to protect your contents.
Power Failure
MAINTENANCE OF YOUR BEVERAGE CENTER
The outside of the beverage center should be cleaned with mild detergent and
warm water.
Wash the shelves and trays with a mild detergent solution.
Wash the inside with a warm water and baking soda solution. The solution
should be about 2 tablespoons of baking soda to a liter of water.
Unplug the beverage center, and remove the bottles.
CLEANING YOUR BEVERAGE CENTER
Also, there is a 4 to 6 C variance between the top and bottom shelves of
the beverage center. Therefore, If you have set the beverage center for
beer only and you want to place a sparkling wines, you should place the
wine bottles on the top shelves and the beers on the bottom shelves.