Haier HW90-BP14959S6, Руководство пользователя, Страница: 20 / 32

7-Care and cleaning
1. Turn off and unplug the machine (Fig. 7-6.1).
2. Open
(Fig. 7-6.2).
3. Provide a flat container to catch leach water
(Fig. 7-6.3). There could be bigger amounts!
4. Pull the drain hose out and hold its end above the
container (Fig. 7-6.3).
5. Take the sealing plug out of the drainhose (Fig.
7-6.3).
6. After complete drainage close drainhose (Fig.
7-6.4). and push it back into the machine.
7. Unscrew and remove counter clock wise the pump
8. Remove contaminants and dirt (Fig. 7-6.6).
filter (Fig. 7-6.5).
7-6.3
7-6.4
7-6.5
7-6.6
7
7.6 Pump filter
.5 Long periods of disuse
If the appliance is left idle for a longer period:
1. Pull out the electrical plug (Fig. 7-5.1).
2. Turn off water supply (Fig. 7-5.2).
3. Open the door to prevent formation of moisture
and odours. Let door open while not used.
Before next usage check carefully power cord, water
inlet and drain hose. Make sure everything is properly
installed and without leakage.
7-5.1 7-5.2
WARNING!
Scalding Risk! Water in the pump filter can be very
hot! Before any action please ensure water has co-
oled down.
Note: Hygiene
After long periods of disuse we recommended to run programme Drum Clean with no
load and small amount of detergent in washing agent compartment (2) or special m-
achine cleaner to remove possibly corruptive residues.
f
Clean the filter once a month and check the pump
or instance if the appliance:
Doesn´t drain the water.
Doesn´t spin.
Cause unusual noise while running.
7-6.2 7-6.1
filter
19
Filter cover