Haier HW90-BP14959, Руководство пользователя, Страница: 23 / 60

Problem Cause Solution
•
Motor error.
•
Contact the After sales service.
•
Abnormal communication error.
•
Contact the After sales service.
Contact the After sales service.
•
Unbalanced load error.
• . m u r d e h t n i d a o l y r d n u a l e c n a l a b d n a k c e h C
Reduce the load.
Problem Cause Solution
Washing machine fails
to operate.
• Programme is not yet started. • Check programme and start it.
•
Door is not properly closed.
•
Close the door properly.
• Machine has not been switched on. • Switch the machine on.
• Power failure. • Check power supply.
• Child lock is activated. • Deactivate child lock.
Washing machine will
not be filled with water.
• No water. • Check water tap.
• Inlet hose is kinked. • Check inlet hose.
• •
•
Water pressure is less than 0.03 MPa.
•
Check water pressure.
• Door is not properly closed. • Close the door properly.
• Water supply failure. • Ensure the wa
Unblock inlet hose filter.
ter supply.
Machine is d
while being filled.
raining • Height of drain hose is below 80 cm. • Make sure that drain hose is
properly installed.
• Drain hose end could reach into
water.
•
Make sure the drain hose is not
Make sure the drain hose is pro-
Drainage failure. • D
Pump filter is blocked. rain hose is blocked. • Unblock dr
Clean pump filter.
ain hose.
• •
• Drain hose end is higher than 100 cm
above fl oor level.
•
Strong vibration while
spinning.
• Not all transportation bolts have
been removed.
• Remove all transportation bolts.
• Appliance has no solid position. • Ensure solid ground and a levelled
position.
• Machine load is not correct. • Check load weight and balance.
Operation stops
before completing
wash cycle.
• Water or electric failure. • Check power and water supply.
Operation stops for a
period of time.
• Appliance displays error code. • Consider display codes.
•
Problem due to load pattern.
•
Reduce or adjust load.
• Programme performs soaking cycle. • Cancel programme and restart.
Excessive foam floats
drum and/or detergent
drawer.
• Detergent is not appropriate. • Check detergent recommenda-
tions.
• Excessive use of detergent. • Reduce amount of detergent.
8.3 Trobleshooting without display code
•
Water level sensor error.
•
8-Troubleshooting
or
in water.
perly installed.
Inlet hose filter is blocked.
22