Haier HW80-IM12826TNZP, Руководство пользователя, Страница: 25 / 32

9.5 Drain Water C
●
onnection
Fix the water drain hose properly to the piping. The hose has to reach at one point a height
bet
●
ween 80 and 100 cm above the appliance bottom line! If possible keep always drain
WARNING!
Use only the supplied hose set
●
for the connection.
Never reuse old hose sets!
Only connect to cold water supply.
Before connection, check whether the water is clean and clear.
9.4 Aligning the appliance
Adjust all feet (Fig. 9-5) to achieve a complete level
position. This will minimize vibrations and thus noise
during use. It will also reduce wear and tear. We recom-
mend to use a spirit level for adjustment. Floor should
be as stable and at as possible.
1. Loose the locknut (1) by using a wrench.
2. Adjust the high by turning the foot (2).
3. Tighten locknut (1) against the housing.
9-5
GB
9-Installation
25
9.3 Moving the appliance
If the machine is to be moved to a distant location, replace the transportation bolts re-
moved before installation to prevent damage:
1. Remove the blanking plugs.
2. Remove the back cover
3. Insert the plastic spacers and the transportation bolts.
4. Tighten the bolts with a spanner.
5. Replace the back cover.