Haier HW80-BD14979U1, Руководство пользователя, Страница: 11 / 36

EN
3-Control panel
11
3-14
3-15
3-16
Note: Child lock
▶
The child lock which is set up manually must be cancelled manually or will be cance-
ledautomatically at the end of the program.Power off and error informationwon’t
canncel child lock.It still works when the applicance is powered on next time.
▶
If you use the child lock, fi rst press the program key, then the child lock will be on.
▶
Hold it for 3 seconds, the child lock will turn to full light and the child lock will be activa-
ted.
▶
Child lock can‘t be set up or cancelled through hOn APP.
Temp .
Spin
Remote
Ec o 40-60 Cotton 20°C
cate Refres h
Extra Rins e
Speed
Temp .
Remote
Eco 40-60 Cotton 20°C
Refres h
ns e Speed
3.5 Child lock
Choosing a programme and then start, touch button
“ Delay” and ”Steam”( Fig .3-14) for 3 seconds simulta-
neously to block all panel elements against activation,
panel display .For unlocking please touch again the
two buttons.The child lock indicator lights up when the
child lock works. Feature is optional when the machine
is running.
The display shows

(Fig. 3-15) if a button will be
pressed, when the child lock is activated. The change
is not running.
3.6 Detergent drawer
Open dispenser drawer, the following components
can be seen (Fig. 3-16):
1. The main washing compartment, for powder or
liquid detergent.
2. Compartment for softner.
3. Pre-wash compartment, for a small amount of
powder detergent.
4. Lock tab, press it down to pull out dispenser
drawer.
The recommendation on the type of detergents
is suitable for the various washing temperatures,
please refer to the manual of detergent.
Note:
Procedure to check the number of cycles that the machine has run
Procedure: under standby mode, select “Cotton” programme fi rst, then press “Temp.”
and “Speed” at the same time, it will display the number of running cycles for 2 seconds,
and then back to standby interface. The cumulativer running cycles will add 1 after the
programme ends. The running cycles will be displayed in hexadecimal if it is over 9999.