Haier HW60-1201S, Руководство по обслуживанию, Страница: 24 / 30

SERVICE MANUAL
HW60-1201/S/B
Front Load Washing Machine
Replace PCB
Y
N
Y
Replace inlet valve
Without power ,connect inlet pipe to inlet
valve, then open the tap and observe if
water is entering in dispenser
Without starting but electrifying, measure
the import voltage of inlet valve, is it
between AC 220-240V?
Error message: Water level sensor is unnormal.
Troubleshooting:
N
Y
Check if the pipe connected to the
water level sensor is jammed.
N
Y
Switch on the power and check if
the export voltage from PCB to water
level sensor is not 5V?
Change the PCB or water
level sensor
Without power ,check if the line
of water level sensor is connected
well?
Connect the line well,
make sure the machine
can work.
Connect the line well,make sure
the machine can work.
Y