Haier HW50-10F1, Руководство пользователя, Страница: 62 / 81

62 62
CHAPTER -7: MAINTENANCE AND CLEANING OF YOUR
MACHINE (WATER INLET FILTERS)
Filters to avoid dirt and foreign substances in the water from
penetrating into the machine are available both on the side of
tap and on the ends of water valves along the water inlet hose
of your machine.
If your machine cannot intake sufficient amount
of water despite water tap being open, these
filters should be cleaned.
(It is recommended that you clean your pump
filter once in 2 months.)
• Detach the water inlet hoses.
• Remove the filters on water inlet valves using
pliers and then clean it with a brush in water.
•
Disassemble the filters on the side of tab side
of water inlet hoses manually and clean it.
• Having the filters cleaned, you can fit them in
the reverse of the removal method.
CAUTION:
Filters of water inlet valves may be
clogged due to contaminated water tab or
lack of necessary maintenance or valves
may be broken down, causing water leaking
into your machine continuously.
The breakdowns that may arise due to
these reasons are out of the scope of
warranty.