Haier HW120-BP14959S8, Руководство пользователя, Страница: 17 / 32

se
5-Daily use
1. A
The appliance switches off automatically.
t programme cycle end is displayed.
2.
3. R
Turn off the water supply.
emove laundry as soon as possible to go easy on it and to prevent more wrinkl-
4.
5. Unplug the power cord.
6
.
O
ing.
pen the door to prevent formation of moisture and odours. Let it open while not used
minutes before starting the programme or at the end of programme.The display
switches off.
.
To interrupt a running programme press gently “Start/Pause”. The LED in the button is
flashing. Press it again to resume operation.
To cancel a running programme and all its individual settings:
1. Press “Start/Pause” button to interrupt the running programme.
2.
5.12 After washing
Note: Door lock
For safety reasons the door is locked partially during the washing cycle. It is only pos-
sible to open the door at the end of the programme or after the programme was can-
celled correctly (see description above).
In case of high water level, high water temperature and during spinning it is not pos-
sible to open the door;
is displayed.
Note: Standby mode / energy-saving mode
The switched on appliance will go into standby mode if it will not be activated within 2
5.10 Start wash programme
Press “Start/Pause” button (Fig.5-8) to start. Applia-
nce operates according to present settings. Changes
are only possible by cancelling the programme.
5.11 Interrupt / cancel wash programme
5-8
5.13 Act
minutes before starting the programme or at the end of programme. The display s-
ivate or deactivate the buzzer
The acoustic signal can be deselected if necessary:
1. Switch on the appliance.
2. Select the Drum Clean programme.
3.
Press the “Extra Rinse” button “Temp.” button and “Steam” button at the same time
for about 3 seconds. “ ” will be displayed and the buzzer will be deactivated.
For activating the buzzer press these three buttons at the same time again, then “
” will be displayed.
witches off. The saves energy.
16
Turn the knob to select a new programme and start it.