Haier HW110-B14979S8EU1, Руководство пользователя, Страница: 30 / 36

EN
11-Installation
30
2. Remove the 10 screws (R1-R10) from the
lower back reinforcement, take out reinforce-
ments (S1 and S2) from the machine (Fig. 11-6).
3. Pull the 2 ironbars (1 and 2) (Fig. 11-7).
* (only HWD120-B14979S8)
4. Fill the 6 left holes with blanking plugs (Fig. 11-8)
11.4 Moving the appliance
If the machine is to be moved to a distant location, replace the transportation bolts re-
moved before installation to prevent damage: The assembly takes place in reverse order.
Note: Keep in safe place
Keep all parts of the transport protection in a safe place for later use. Whenever the ap-
pliance is to be moved at fi rst reinstall the protection parts.
11.5 Aligning the appliance
Adjust all feet (Fig. 11-9) to achieve a complete level
position. This will minimize vibrations and thus noise
during use. It will also reduce wear and tear. We recom-
mend to use a spirit level for adjustment. Floor should
be as stable and fl at as possible.
1. Loose the locknut (1) by using a wrench.
2. Adjust the high by turning the foot (2).
3. Tighten lock out (1) against the housing.
11-9
11-6
11-7
11-8