Haier HW100-BP12636S, Руководство пользователя

Страница: 8 / 20

7
6
Inlet Hose
Connect the nut on the inlet hose to the connector on
the
water valve(picture 1).
Use the hose-set supplied with the appliance.
Old hose-sets should not be reused.
b. Loosen the four screws of the water inlet joint and fit the
water inlet joint on the faucet, Make sure the screws is in
water inlet joint
lock pole
Slider
Water pipe
1.
2.
screw
3.
4. 5.
a. Hold down the lower end of the lock pole,Then hold the
inlet pipe, press on the slider, and remove the water inlet
joint (picture 2).
c. Press the slider and insert the water pipe into the water
inlet joint,hang the water inlet joint with a lock pole and
release the slider