manualshive.com logo in svg

Haier HW-F1081 ME, Руководство пользователя, Страница: 18 / 20

Поделиться
Скачать
Haier HW-F1081 ME Скачать руководство пользователя страница 18

18

MAINTENANCE

DISPLAY CODES

CODES

CAUSES

SOLUTIONS

Err1

¬ Washer door is not properly shut.

_ Close the washer door properly

Err2

¬ Drainage error.

_ Clean the fi lter and check the drain hose for blockage.

Err3

¬ Temperature sensor error 
(Appears at the end of a cycle).

_ Please contact the Service Center.

Err4

¬ Heater error (Appears at the end of a cycle).

_ Please contact the Service Center

Err5

¬ Water inlet error.

 _ Check the tap and the water pressure.

Err6

¬ Motor error.

_ Please contact the Service Center.

Err7

¬ Motor error.

_ Please contact the Service Center.

Err8

¬ Water exceeds protective level.

_ Please contact the Service Center.

Er10

¬ Water sensor error.

_ Please contact the Service Center.

unb

¬ Laundry is unevenly distributed.

_ Redistribute laundry to balance the drum.

End

¬ End of wash cycle. 

1:16

¬ Status information: remaining program time is 1 hour and 16 minutes.

0:01

¬ Status information: remaining program time is 1 minute.

60

¬ Status information: Preset washing temperature is 60° C.

--

¬ Cold wash. 

800

¬ Status information: Preset spinning speed is 800rpm.
¬ Keyboard is locked. 

DISPLAY CODES AND SPECIAL FUNCTIONS

¬ Control panel lock function: Press the "Delay" and the "Start/Pause" buttons simultaneously for 3 seconds after starting a program. It can no longer be changed by operating buttons or 
knobs. The washing machine emits an audible signal while the control panel is locked. To unlock press the "Delay" and "Start/Pause" buttons again for 3 seconds.
¬ Power-off memory function: In case of abrupt power failure or the need to cut off the power during a program cycle, the present settings will be saved and the preset operation will resume 
when the power is on again.
¬ This washing machine memorises the previous wash settings for each program. If you press the "Start/Pause" button, the previous settings are automatically selected. 
¬ To cancel a program or select a new program and options during the wash cycles.
a) Press the "Start/Pause" button, then switch off the power and the program is automatically cancelled. Turn the program selector again to choose another program.
b) If you wish to select an option during the wash cycle, press the "Start/Pause" button, then select the desired option and press the "Start/Pause" button again.
Note: The Rinse hold function can be selected directly without pressing fi rst the "Start/Pause" button, but before the machine starts the spin program.

Содержание HW-F1081 ME





















Отзывы:

Нет отзывов