Haier HTVF20R72 Скачать руководство пользователя страница 17

Страница: 17 / 41

the remote controller for option of AV/TV.

．

Press MENU button again to quit the main menu.

TIME setup

．

Press MENU button and the main menu appear on the screen.

．

Press CH+ or CH- button to move the icon for TIME setup. The designated CLOCK under the icon will turn

bright green.

．

Press VOL+ or VOL- button for options of hour, minute and am/pm on the CLOCK.

．

Press CH+ or CH- to adjust the figure until designed time value is reached. Set ON TIME/OFF TIME with the

same way.

．

Press CH+ or CH- for option of SLEEP. Press VOL+ or VOL- for option of set clock. The clock display will

turn bright green while SLEEP icon turns blue. Press CH+ or CH- for sleep period adjustment.

0:15 0:30 0:45 1:00 1:15 1:30 1:45 2:00

．

When CHANNEL in TIME setup is designated, this option will be the preset channel when the TV set is

turned on or off.

．

Press MENU button again to quit the main menu.

SPECAIL

．

Press MENU button Press MENU button Press MENU button and the main menu appear on the screen.

．

Press CH+ or CH- button to move the icon to SPECIAL, and designate C.CAPTION. Then icon of

C.CAPTION turns to bright green. When OFF is displayed, C.CAPTION is inactivated while when ON is

displayed, C.CAPTION is activated.

．

Press CH- to move the icon to CC ON MUTE and the icon will turn bright green. Press VOL+ or VOL-

button for adjustment of this function. When OFF is displayed, the item cannot display its function regardless of

the indication of C.CAPTION. When this item displays C1 while C.CAPTION displays OFF, the system will

activate C.CAPTION function automatically.

．

Press CH- button to move the icon to POWER RESTORE. Press VOL+ or VOL- to adjust power on and off.

．

When icon designates MENU OFFSET, the digital value of the designated item can be adjusted by pressing

VOL+ or VOL-. Function of this item is to change the location of the menu.

．

Press MENU button again to quit the main menu.

—

CHIP setup

This function is designed for television program limitation. The TV set user is allowed to control the usage of the TV

set in accordance with the regulations of US Federal Communications Commission. This function is also destined to

prevent children from watching the TV programs which are improper for juvenile.

Program Diagram

Содержание HTVF20R72










































Результаты поиска

Содержание HTVF20R72

Отзывы:

Похожие инструкции для HTVF20R72

Бренды по названию

Популярные бренды

Haier HTVF20R72, Руководство по обслуживанию

Результаты поиска

Содержание HTVF20R72

Отзывы:

Похожие инструкции для HTVF20R72

Бренды по названию

Популярные бренды