PSO MEMORY
8
POSITION 01
BAND VHFL
SKIP OFF
SEARCH UP
MFT UP
AUTO MEMORY
→
▍▍
▍▍▍▍▍▍▍▍▍▍▍▍▍▍
↓
PSO MEMORY
POSITION 01
8
BAND VHFL
SKIP OFF
SEARCH UP
MFT UP
AUTO MEMORY
→
▍▍
▍▍▍▍▍▍▍▍▍▍▍▍▍▍
→
VHF
L
→
VHF
H
→
UHF
Figure 3
PSO MEMORY
8
POSITION 01
BAND VHFL
SKIP OFF
SEARCH UP
MFT UP
AUTO MEMORY
→
▍▍
▍▍▍▍▍▍▍▍▍▍▍▍▍▍
↓
PSO MEMORY
POSITION 01
BAND VHFL
SKIP OFF
SEARCH UP
8
MFT UP
AUTO MEMORY
→
▍▍
▍▍▍▍▍▍▍▍▍▍▍▍▍▍
Figure 4
4. Band selection
In semi-auto search, if the program signal you want to
search is not in the current band, you can change the
range to speed up the searching.
1) Press menu button [MENU] and the “POS.
MEMORY” menu will appear on the screen;
2) Press selection button [-PRO+] or [
↑
] [
↓
] to point
the red “
►
” on the screen to “BAND”;
3) Press adjustment button [-
◢
+] or [
→
][
←
] to adjust
to your desired signal band. (See Figure 3)
5. Usage of fine tuning
For some reasons or the interference of antenna system,
the picture and audio effect of programs searched by
auto search may not be so good, then fine tuning of the
frequency shall be used.
1) Press menu button [MENU] and the “POS.
MEMORY” menu will appear on the screen;
2) Press selection button [-PRO+] or [
↑
] [
↓
] to point the
red “
►
” on the screen to “MFT”;
3) Press and hold adjustment button [-
◢
+] or [
→
][
←
]
until the optimum picture and audio effects are obtained
and then release the button. (See Figure 4)
6. Skip
After presetting the positions, you can skip the
unnecessary position numbers (such as repeated signals,
pseudo signal, etc.), in order to select only the programs
you need.
1) Press program button [- PRO +](or press digit button
directly), select the position number you want to skip
(take Position 04 as an example);
2) Press menu button [MENU] and the “POS.
MEMORY” menu will appear on the screen;
3) Press selection button [-PRO+] or [
↑
] [
↓
] to point
the red “
►
” on the screen to “SKIP”;
4) Press adjustment button [-
◢
+] or [
→
][
←
] to turn it
ON. (See Figure 5)
Note:
When a certain position number is in SKIP ON
mode, this position number will not appear when you
select the programs with [-PRO+] button. (But with
direct selection buttons, the number will appear.) When
a certain position number is in the SKIP OFF mode, the
position number will appear when you select the
programs with [-PRO+] button.
4
↓
PSO MEMORY
8
POSITION 04
BAND VHFL
SKIP OFF
SEARCH UP
MFT UP
AUTO MEMORY
→
▍▍
▍▍▍▍▍▍▍▍▍▍▍▍▍▍
↓
PSO MEMORY
POSITION 04
BAND VHFL
8
SKIP OFF
SEARCH UP
MFT UP
AUTO MEMORY
→
▍▍
▍▍▍▍▍▍▍▍▍▍▍▍▍▍
Figure 5
All manuals and user guides at all-guides.com
Содержание HT-2599
Страница 29: ...All manuals and user guides at all guides com ...
Страница 44: ...All manuals and user guides at all guides com ...