Haier HSU-12LNA/022L(W), Руководство по эксплуатации

Страница: 13 / 24

20
Operation
After unit start
(1) Select your desired operation mode
with "MODE BUTTON".
Operation mode will be displayed on LCD.
Power indicator on indoor lights up.
Airflow Position
(2) Press Air Flow Button to Change the airflow
direction
Every time the button is pressed, display changes.
(3) 3-Set Step position of Vertical Louver.
The 3-set step position of Vertical Louver
will be controlled with the "SWING" Button on the
Remote Control.
(4) Air Flow setting.
Position of vertical Louver can be set per your
requirement and this will be controlled with "AIRFLOW"
button .i.e.
(1) When you will press the button of "AIRFLOW"
Vertical Louver will start moving from extreme up to
extreme down and vice versa.
(2) And when you will press the same button again it
will stop immediately.
19
Hints
Operation
(4) Confirming your setting
After setting correct time, press SET
button to confirm, "ON" or "OFF" stop
flashing.
Time displayed: Unit starts or stops at
x hour x min.
(TIMER ON or TIMER OFF).
Timer mode indicator on indoor unit
lights up.
After replacing batteries or a power failure happens, Time setting should be reset.
Remote controller processes memory function, when use TIMER mode next time, just
Press SET button after mode selecting if timer setting is the same as previous one.
To cancel TIMER mode
Just press TIMER button several times
until TIMER mode disappears.
(4)
(1)
(2)
(3)
(4)