
23 - EN
English
• After the appliance is located, ensure that the water tube is properly arranged to avoid indents or
damages.
• The water fi lter absorbs impurities from the water to be supplied for ice cube making. A period of time,
usually 6 months, later after the icemaker is set operational, insuffi cient or smaller size ice cubes
might be supplied. In such case, the cold water icon will turn red, indicating that the fi lter needs to be
changed. (Contact Haier‘s local after-sales service center or place order through Haier‘s e-commerce
website for purchase of the fi lter.) Hold Super Freeze button pressed for 5 seconds after the fi lter is
replaced, and the icon will turn blue. The manufacturer will provide you one water fi lter and service for
initial installation of the fi lter.
• Installation of the icemaker must be carried out by an authorized agent.
• This icemaker can only be supplied with drinking water.
3
Operating principle of icemaker
8 cubed ices are made in every cycle. Capacity of ice making depends on freezer temperature, ambient
temperature and appliance door opening frequency.
Caution: Allow 24 hours after the appliance is installed before the freezer compartment
temperature drops down to the degree for ice making.
First loads of cubed ices are not potable after the appliance is operated for the fi rst time or an extended
period of vacation.
To ensure that the cubed ice tray is fully fi lled, manual arrangement is necessary.
Some of the 8 cubed ices dropped from the icemaker in one cycle may stick to each other.
Handling ice cube tray
Dismounting the cubed ice tray
Pinch the cubed ice tray at the center and remove it
from the shelf.
Replacing the cubed ice tray
Slide the cubed ice try to the grooves by the two
sides of inner liner until the clips fi t to position.
If the cubed ice tray cannot fi t the position properly,
remove the cubed ice tray and turn the holder
structure by 90°, then replace the cubed ice tray
again until the clips fi t to position.
Rotation
Holder