8- Care and cleaning
GB
26
8.3 Defrosting
The defrosting of the fridge and the freezer compartment are done automatically; no
manual operation is needed.
The lamps adopt LED as their light source, featuring low energy consumption and long
service life. If there is any abnormality, please contact the customer service . See CUS-
TOMER SERVICE.
Parameters of the lamps: 12 V; max 4.5 W
8.4 Replacing the LED-lamps
8.5 Replacing the filter
The water filter has to be changed approximately every 6 months, when the “Change Fil
-
ter” indicator light (c) lights up (Fig. 5.13).
The filter set can be ordered via the CUSTOMER SERVICE.
1.
Press the top of the water filter housing (Fig. 8.5-1)
to take it off;
2.
Turn the water filter 90° anticlockwise;
3.
Pull the water filter from the water filter support;
4.
Insert the new water filter inside the water filter
support;
5.
Turn the new water filter 90° clockwise;
6.
Turn off the “Change Filter” indicator: Touch key
“C” (Filter Reset) for 3 seconds, indicator “c” turns
off (Fig. 8.5-2).
8.5-1
3 Sec. Filter Reset
8.5-2
WARNING!
Do not replace the LED lamp yourself, it must only be replaced by either the manufac-
turer or the authorised service agent.
WARNING!
▶
Before replacing the filter, deactivate the appliance and disconnect the mains plug
from the mains socket.
▶
Turn off the water supply.
WARNING!
▶
Ensure that the connection is always firm, dry and
leak free!
▶
Make sure the hose is never crushed, kinked, or
twisted
