10
Issue 200906
Rev. Ref0906S012V0
Chapter 3 Disassembly
3-1Remove the doors
3-1-1Remove the kick moulding
Remove the kick moulding,and then release
thewater coupler. Slide the kick moulding up to
remove it,and then release the water coupler
while pressing on area(1) as shown in the
illustration.
3-1-2 Remove the Freezer door
1)Unscrew the hinge covers. Disconnect all
wires except for the grounding wire.
2)Remove the screws from the upper hinge
following the direction as indicated by Arrow(1).
Then remove the upper hinge following the
direction as indicated by Arrow(2).
3)Lift the freezer compartment door to remove it.
Next,lift the door enough to be able fully pull out
the water line.
3-1-3 Remove the Fridge door
1) Loosen the hinge cover bolts, and then
remove the cover. Disconnect any wires
except for the grounding wire.
2) Remove the screws from the upper hinge
following the direction as indicated by Arrow
(1). Then remove the upper hinge following
the direction as indicated by Arrow (2).
3) Lift the refrigerator compartment door to
remove it.
Precautions During Dismantling and Installation of The Door
(1) Before removing the doors, please remove food from the shelves and the bottle guards. Then,
unplug the refrigerator power cord to avoid personal injury, product damage or property loss.
(2) During dismantling of the door, in order to avoid possible personal injury, product damage or
property loss, at least two adults are needed to perform the following operations.
(3) While lifting the hinges to separate it from the door, please take care to prevent the door from
falling forward.
Water coupler
Toe moulding
Wires
Upper hinge
Screw
Lower hinge
SERVICE MANUAL
Model:
HRF-663
ISB2R/B/W
