Haier HRF-522IB6, Руководство пользователя

Страница: 12 / 40

5- Use
GB
12
5.3 Switch on /off the appliance
The appliance is in operation as soon as it is connected to the power supply.
When the appliance is powered on for the first time, freezer temperature is shining on the
display “b2”until the temperature reaches -5°C or after 1 hour working. The temperatures
displayed will shown the actual temperatures in the compartment.
Maybe the panel lock is active.
Empty the appliance before switching off. To switch off the appliance,pull the power cord
out off the power socket.
5.4 Standby-mode
The display screen turns off automatically 30 seconds after touching a key. The display will
be automatically locked. It lights up automatically by touching any key or opening one of
the doors.
5.2 Sensor keys
The keys on the control panel are sensor keys, which already respond when lightly touched
with the finger.
5.1 Before first use
▶
Remove all packaging materials, keep them out of children`s reach and dispose
them in an environmentally friendly manner.
▶
Clean the inside and outside of the appliance, as well as the interior and accessories
with water and a mild detergent and dry it well with soft cloth.
▶
Clean the After the appliance has been levelled and cleaned, wait for at least 2 hours
before connecting it to the power supply. See Section INSTALLATION.
▶
Precool the compartments at high settings before loading with food. The function
Super Cool and Super Freeze helps to cool down the compartments quickly.
▶
The refrigerator temperature and freezer temperature are automatically set to 5° C
and -18° C respectively. These are the recommended settings. If desired, you can
change these temperatures manually. Please see MANUAL ADJUSTING MODE.
Notice: Presettings
▶
The appliance is preset to the recommended temperature of 5°C (refrigerator) and
- 18°C (freezer). Under normal ambient condition you need not to set a temperature.
▶
When the appliance is switched on after disconnection from the main power supply, it
may take up to 12 hours for the correct temperatures to be reached.