5
Select a safe place to
install your refrigerator.
Level the refrigerator by
using the adjustable foot.
Install the parts in their
respective places.
Check if the doors are
completely shut.
Check the voltage and
wait for an hour before
plugging the power cord
into an outlet.
After running the
refrigerator for 2-3
hours, put food in the
refrigerator.
INSTALLATION STEPS
10
The temperature and humidity of the room.
The frequency of door openings and the amount of warm food placed in the
refrigerator.
The combination of food and containers stored in the refrigerator.
For these reasons, you may have to adjust the control to suit the season and
your needs as follows:-
Set temperature control at FRZ. MAX for higher cooling & REF. MAX for lower
cooling in freezer compartment.
Set temperature control at MAX for colder temperature and at MIN for warmer
temperature in the refrigerator section.
Allow approximately 12 hours or overnight for temperature to stabilize.
Then check to see if further adjustments are necessary.
Many factors influence the internal temperature of the refrigerator and freezer section.
FOR BEST SETTING DURING COLD AND HOT WEATHER, WE RECOMMEND THE FOLLOWING:
Set the ‘Freezer temperature control’ at FRZ. MAX. Since the refrigerator operates
less, the freezer compartment will require additional cooling during cold weather.
If loaded with large quantities of food, the refrigerator compartment will require
additional cooling during hot weather. Hence set the ‘Refrigerator temperature
control’ at MAX.
Do not set the ‘Refrigerator temperature control’ beyond the MAX and MIN.
The ‘Test Run’ is to be used only for a service check.
CAUTION
!
To turn off refrigerator
Disconnect the power supply cord. Remove ice tray and food. Leave doors open for
air circulation and dehumidification of both sections.
TO CHANGE TEMPERATURE
