Haier HP200M3, Инструкция по установке и обслуживанию, Страница: 34 / 40

34
3
、
Remove the Air channel and fan
4
、
Remove the Magnesium rod
Off the power and close the inlet valve, open any outlet valve, exhaust pressure, when no water
flows out of time
，
turn off all the valves.
①
Remove the magnesium rod cover
；
②
After remove the magnesium rod, according to the consumption of magnesium rod, determine
whether you need to replace.
5
、
Remove the temperature sensor
①
Remove the fixing screws, remove the water tank flange cover
；
②
Remove the temperature sensors and thermostat temperature sensor.
magnesium rod cover
magnesium rod
Temperature tube
（
up
）
Temperature tube
（
down
）
First insert the temperature
sensor, and then insert the
thermostat temperature sensor to
Temperature tube
（
down
）
.
Temperature sensor must be
inserted into the bottom of the
tube.
water tank flange cover
1. remove the
Air channel - up
2. remove the
fan
3. remove the Air
channel – down