manualshive.com logo in svg

Haier HP-2999, Руководство по обслуживанию

Поделиться
Скачать
Haier HP-2999 Скачать руководство пользователя страница 40

 

 

39  

3 

G  input 

2.8 

7.6K 

7.4K 

4 Ground 

0 

0 

0 

5 

Dark current detection output 4.9 

3.1M 2.7M 

6 Power 

supply 

182.6 34.2K 

28.2K 

7 

R  cathode output 

97.6 1.4M 

2.6M 

8 

G  cathode output 

100.1 1.4M 

2.6M 

9 

B  cathode output 

93.4 

1.4M 

2.6M 

 

2.10 Analysis of power switch circuit 
 
A typical self-excited pulse power switch has been chosen for this TV receiver. When the power 
switch is in the ON position, the voltage from AC 220 V power grid will be rectified by a rectifying tube 
VD810 to produce a pulse voltage , which will be filtered by a capacitor C806 220u to form a DC 
voltage of about+300V, and the said DC voltage will be fed into the (1) of the power integrated circuit 
N801 KA5Q1265RF-YDTU entry by the (1) (4) windings of switch transformer T801 BCK-100-02 ; 
 
At start-up, the voltage from an AC single-phase power supply will be divided by starting resistors 
R803 and R802 to provide starting voltage to N801. After start-up, an impulse voltage produced by 
(6) (7)windings of T801 will be rectified and provided. Photo coupler N802 PC817C entry serves the 
function of voltage regulation. The error message about the voltage exported by the switch 
transformer will be transmitted to the (4) of N801by the photo coupler N802, hence adjusting the 
oscillation parameters of N801.   
 
During stand-by time, POWER signals will be at a lower level, which causes the triode V803

KSC815 to stop. So a 12V will be put into the photo coupler N802 PC817C entry by 

resistor R849 and diode VD816, which feeds a special parameter to the (4) of N801 and makes the 
N801 enter a quasi-resonance working state, with the power supply voltage (3) being 11V 12V. In 
this way, the output voltage of the switch transformer T801will drop a great deal, resulting in a great 
reduction of stand-by power consumption. 
 
The impulse voltage sent out by the (8) of the secondary of switch transformer will be rectified and 
filtered by VD805 D5L60 and C816 100u to produce a DC v130Vfor power supply to line 
output electrode; 
 
The impulse voltage sent out by the (13) will be rectified and filtered by VD807 D6L20U and C820

2200u to produce a DC v15Vfor power supply to sound amplification circuit. 

 
The impulse voltage sent out by the (11) will be rectified and filtered by VD806 TR5GU41 and C818

2200u to produce a DC v12Vfor power supply to secondary power supply. 

 

The DC v8V sent out by the (8) of N804 after a voltage regulation of secondary power supply 
will supply power to N201 decoding circuit, the DC v3.3V obtained by the voltage regulation 
of 12V by the resistor R843 2K , triode V801 KSC815 and diode DZ808 MTZ3.9B will supply 
power to N201 micro-processing circuit, and the DC v5V sent out by the (9) will supply power 
to a storage block N202 KS24C08 circuit.  

Circuit Explanation

 

Содержание HP-2999



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды