English
17
English
INSTALLATION OVERVIEW
B1. Prepare Rear Wall
B2. Remove Blower Plate
B3. Attach Mounting Plate to Wall
B4. Prepare Top Cabinet
B5. Adjust Blower
B6. Mount the Microwave Oven
You need to cut an opening in the rear
wall for outside exhaust.
Read the instructions on the REAR
t
WALL
TEMPLATE.
Tape it to the rear wall, lining up with
t
the holes previously drilled for holes A
and B in the wall plate.
Cut the opening, following the
t
instructions of the REAR WALL
TEMPLATE.
Remove and save the screw that holds the
blower plate to the microwave. Lift off the
blower plate.
B1. PREPARING THE REAR WALL FOR OUTSIDE BACK EXHAUST
B2. REMOVE BLOWER PLATE
B. OUTSIDE BACK EXHAUST
(HORIZONTAL DUCT)
Back of
Microwave
Blower Plate
IMPORTANT NOTES:
Make sure the screws for the blower motor and blower plate are securely
t
tightened when they are reinstalled. This will help to prevent excessive vibration
Make sure the motor wiring has been properly routed and secured, and that
t
the wires are not pinched.
