Picture mode: it is used to select the desired picture mode.
Contrast: it is used to adjust the contrast effect according to
your own favorite.
Brightness: it is used to adjust the brightness effect
according to your own favorite.
Sharpness: it is used to adjust the sharpness according to
your own favorite.
Tint: it is used to adjust the tint effect according to your own
favorite.
Color: it is used to adjust the color according to your own
favorite.
Balance: it is used to adjust the balance effect according to
your own favorite.
Audio language: it is used to select the desired audio output
language.
Picture Mode
Contrast
Brightness
Sharpness
Tint
Color
Personal
62
53
50
0
60
UP/DOWN
ADJUST MENU:EXIT
0
English
UP/DOWN
ADJUST MENU:EXIT
Balance
Audio Language
60 Sec
Off
Central
Off
----/--/-- --/--
UP/DOWN
ADJUST MENU:EXIT
OSD Duration
Sleep Timer
Time Zone
Daylight Saving Time
Clock
OSD Duration: it is used to set the OSD display duration.
Sleep Timer: it is used to set the sleep timer to auto power
off the set.
Time Zone: it is used to select time zone from different
region.
Daylight Saving time: it is used to advance one hour of the
daylight time in summer in order to save the power.
Clock: during DTV mode, it is used to show code create
date.
Menu Language: it is used to change menu language.
Color mode: it is
Zoom Mode: it is used to select the display type.
rvice 2, Service 3,
Restore Setting: select this option to restore the factory
setting.
used to change the color mode of screen.
Closed Caption: it is used to select the broadcasting
program provides closed caption. There are three options as
below:
CC mode: use to select on, CC on Mute, off.
Basic Selection: select among from CC1, Cc2, CC3,
CC4,Text1, Text2, Text3 and Text4.
Advance Selection: service 1, Se
Service
4, Service 5, Service 6,
Antenna: it is used to select the Antenna type CATV or air.
Auto Scan: use this function to auto scanning and stored
tuned channels. Select auto scan option, then press
NAVIGATION RIGHT button to access the submenu, select
the desired Cable system and then enter the auto scan
option to begin auto scan.
Show/Hide:it is used to show or hide the programs
according to your own favorite.
Favorite: it is used to select your favorite programs.
Channel NO.: Select the desired program from this option.
Channel Label: it is used to edit the name of the selected
program.
Antenna
Auto Scan
Show/Hide
Favorite
Channel No.
Channel Label
Air
UP/DOWN
ADJUST MENU:EXIT
English
Normal
UP/DOWN
ADJUST MENU:EXIT
Menu Language
Color Mode
Closed Caption
Restore Setting
Zoom Mode
Wide
4
Note: this ATSC&Analog TV receiver can store the
channels from 2~69, and the maximum of each channel
has 8 programs. To select the desired programs by using
- button and numeric buttons.
Do as follows:
To select CH 13 NO. 2
Press 1 and 3, then press - and input 2.
Once the input is done, it will start broadcasting the selected
channel immediately.
Too loud the voice will damage your ears, to adjust the
volume, use the VOLUME UP/DOWN buttons on the main
unit or on the remote control.
This TV set is with two speakers inside the front panel,
which are enabled immediately it is powered on.
Press TV/AV button on the remote or MODE button on the
main unit to select TV mode, then Press once the MENU
button, the screen will pop up a setting menu;
use the NAVIGATION LEFT/RIGHT buttons to select among
the setting options, then press NAVIGATION UP/DOWN
button to enter the sub menu, again use NAVIGATION
LEFT/RIGHT button to select the desired option or adjust
and press OK/ENTER Button to confirm the item to be set;
Press MENU button to go to previously menu and press
EXIT button to exit the menu interface.
ADJUST THE VOLUME
AUDIO EFFECT OPTIONS
TV SETTING MENU
Содержание HLT71
Страница 8: ...Haier HLT71 ...
