Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
Usage of the drain hose
1.The height of the drain hose shall be
less than 10cm, or the drainage will not
be smooth, and cost such long time that
the machine may stop at mid way.
2.Do not ramp or press the drain hose.
The drain hose shall drain smoothly
4.If extra drain hose is needed, please
make separate purchase. The inner
diameter of the extra hose shall not
less than 26mm, and the length shall
not exceed 1.5m.
Install the water inlet hose
Please install the water inlet according to the machine .
Control panel
s frame
(Figure 1)
Insert the Water inlet pipe into the Water-filling
entrance
If want to demount the water inlet pipe
pull it out
.
4
Figure 1
Water inlet pipe
Water-filling entrance
3.If the drain hose is too long, cut it at mid
point. To make smooth drainage, cut the
front end of the hose slantingly.
If the extra hose is too long, cut it
either at A or at B point.
